The back of an earring decides how it stays in place, how easy it is to put on and how many pairs end up lost behind the sofa.
The main types of earring backs fall into a few groups: push-on backs for studs, threaded screw backs, fittings built into the earring itself such as hooks and lever-backs, and clip-ons for unpierced ears. Knowing which is which helps you buy the right replacements and judge thrifted pairs, which often turn up with mismatched or missing backs. For the earring styles themselves, our Types of Earrings hub covers studs, hoops, drops and more.
Earring back types at a glance
| Back | Key feature | Typically worn with |
|---|---|---|
| Butterfly (friction) push back | Removable clutch that grips a smooth post | Everyday studs |
| Screw back | Back that screws onto a threaded post | Precious-metal and solitaire studs |
| Silicone or rubber back | Soft stopper pushed onto the post | Light studs, hooks as a retainer |
| Locking back | Push back with a catch that grips the post | Studs worn often |
| French hook | Open wire through the piercing | Drops and dangles |
| Lever-back | Hinged lever that closes onto the wire | Drops and dangles |
| Hinged sleeper | Two semicircular wires with a hinge and clasp | Small hoops |
| Clip-on | Two pieces closing around the lobe | Unpierced ears |
Backs for stud earrings
Butterfly (friction) push back
Wikipedia’s earring entry says studs are “held in place behind the ear by means of a removable friction back or clutch (sometimes referred to as a butterfly or scroll fitting).” To spot one, look for a small metal piece with two curled wings that pinch a smooth post. It is the most familiar push back, and replacements are easy to find.
Screw back
The same source says that “the posts of some more expensive stud earrings made of precious metals or containing precious stones, such as solitaire diamonds, are threaded, allowing a screw back to hold the stud securely in place.” To spot one, look closely at the post: fine ridges along it mean it is threaded, and the back turns on rather than sliding.
Push back vs screw back
A push back slides straight on and off a smooth post and is held by friction, so it is quick to use. A screw back has to be turned on and off a threaded post, which takes longer but holds more securely, per Wikipedia’s description. The two are not interchangeable: a push back will not grip properly on a threaded post, and a screw back cannot thread onto a smooth one.
Silicone and rubber backs
Silicone or rubber backs are a common, widely sold option with no single defining source. They are soft stoppers that push onto a post, often sold in bulk packs. Wikipedia also notes that small plastic or silicone retainers are sometimes used on the ends of French hooks.
Locking backs
“Locking” backs is a common retail term for push backs with an extra catch that grips the post, often released by squeezing the sides. Designs vary by brand, so check that a replacement locking back matches the post diameter.
Backs built into the earring
French hook
With a French hook, Wikipedia says, “the wire passes through the earlobe piercing without closure, although small plastic or silicone retainers are sometimes used on ends.” It is the curved wire seen on many drop earrings.
Lever-back
A lever-back is a common term, not defined in the sources used here. It is commonly used to describe an ear wire with a hinged lever that swings up and snaps closed against the wire’s end, so the earring is closed in a loop.
Hinged sleeper
Wikipedia describes hinged sleepers as two semicircular gold wires joined by a tiny hinge at one end and fastened with a small clasp at the other, and says they were common in Britain in the 1960s and 1970s. They are small, smooth hoops designed to stay in.
Clip-on
Clip-ons need no piercing. According to Wikipedia, “the two pieces closed around the earlobe, using mechanical pressure.” Many vintage clip-ons have a hinged paddle or screw-adjusted back, which is worth checking for wear.
Nickel and metal stamps
The American Academy of Dermatology says “it is estimated that more than 18 percent of people in North America are allergic to nickel” and names earrings, earring backs and watches as “some of the biggest culprits.” If you know you react to nickel, check what both the earring and the back are made of. In the US, metal stamps follow the FTC Jewelry Guides: “sterling” requires at least 925/1,000 silver, karat gold is measured in 24ths, and “Gold Filled” may be used “when such plating constitutes at least 1/20th of the weight of the metal in the entire article.” Our Types of Jewelry Clasps guide sets out the other FTC terms.
How to thrift earrings and their backs
- Check that both earrings in a pair have the same type of back.
- Look at each post for bends, and run a fingertip along it to feel for threads.
- Try the back on the post to see whether it grips firmly.
- Open and close lever-backs, sleepers and clip-ons to check the hinge.
- Look for a metal stamp on the post, ear wire or back.
- Plan to clean posts and swap in fresh backs before wearing.
Thrifted studs often turn up without their backs, and replacements are widely sold. A search such as Earring Backs Replacement Butterfly on Amazon, Silicone Earring Backs on Amazon or Screw Back Earring Backs on Amazon brings up packs in different metals; check the post size first. For cleaning, see our How to Clean Jewelry at Home (by Metal and Stone) and How to Clean Sterling Silver Jewelry and Remove Tarnish guides, and for where to look, Thrift Store Jewelry Finds. Matching necklaces are covered in Types of Chains.
Top-selling match on Amazon
- 14K Solid Gold Earring Backs were made of high quality silicone and a thin piece of 14K solid…
- Hypoallergenic Earring Backs Design:There is a 14K real gold tiny little butterfly clip inside…
Top-selling match on Amazon
- Patented Technology: A completely new design of earring backs to keep your earrings safe and secure.
- Hypoallergenic Earring Back: Discreet design – just 6mm diameter. Available in gold, rose gold or silver tone to…
- Universal Fit All: These secure earring backs from LOX will replace traditional bullets and scroll…
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
FAQ
What are the different types of earring backs called?
The main ones are butterfly (friction) push backs, screw backs, silicone or rubber backs and locking backs for studs, plus built-in fittings such as French hooks, lever-backs, hinged sleepers and clip-ons.
Is a push back or a screw back more secure?
Wikipedia describes threaded screw backs as holding a stud “securely in place,” which is why they are used on many precious-metal and solitaire studs. Push backs are quicker to use.
Can I put a push back on a screw-back earring?
Not reliably. Screw backs need a threaded post, and push backs are made to grip a smooth one.
Are earring backs a source of nickel?
They can be. The American Academy of Dermatology names earring backs among “some of the biggest culprits” for nickel allergy, so check the metal if you are sensitive.
How do you stop losing earring backs?
Switch to a more secure back, such as a locking back or, on studs with a threaded post, a screw back, which turns on and holds more firmly than friction. Check that any replacement matches the post diameter and grips firmly when pushed on. A soft silicone back can act as an extra retainer, and a butterfly back that slides off too easily has usually worn and should be replaced.