Most people learn to tie their laces once, as children, and never think about it again until a bow slips loose halfway across a parking lot. A small change in how you start the knot can make a big difference.
Knowing how to tie shoes properly sounds like a solved problem, yet loose laces are one of the most common small annoyances in getting dressed. This guide covers the standard bow step by step, the faster Ian Knot, the double knot, how to tell whether you have been tying a crooked “granny” bow for years, and what a UC Berkeley engineering study found about why laces come undone in the first place. If your sneakers need a refresh before you re-lace them, our guide to How to Clean White Shoes and Sneakers covers washing laces, soles and uppers.
A note on sources: the knot names and the granny-knot advice below come from Ian’s Shoelace Site, a long-running personal reference site by Ian Fieggen in Melbourne, Australia. It is a hobbyist’s site rather than an institution, but it is one of the most detailed shoelace resources online. The research findings come from UC Berkeley News.
Quick answer: how to tie shoes so the bow stays put
- Tie the starting knot: cross the laces and tuck one end under the other, then pull snug.
- Make a loop with one lace, wrap the other lace around it, and push it through the gap to form a second loop.
- Pull both loops tight so the bow sits across the shoe, from left to right.
- If the bow sits lengthwise along the shoe, untie it and reverse the direction of your starting knot.
What you need
- Laces in good condition. Frayed ends and worn tips (aglets) make every knot harder to tie neatly. Replacement laces are inexpensive: a pack of Replacement Shoelaces Flat Athletic on Amazon covers most sneakers, and Round Waxed Shoelaces Dress Shoes on Amazon suit leather dress shoes and boots.
- The right length. Laces that are too long drag and get stepped on; laces that are too short leave tiny loops that pull free. As a common rule of thumb, you want loops and tails long enough to hold, without the tails reaching the floor.
- Shoes laced evenly. Before tying, pull each crossing snug from the toe upward so both ends come out the top eyelets at about the same length.
Top-selling match on Amazon
- ① 3mm Waxed Round Black Dress Shoelaces – Stay Tied All Day A 3mm (1/8") round waxed cotton…
- ② Fray-Resistant Braided Cotton with Reinforced Aglets A tight braided cotton core wrapped in…
Top-selling match on Amazon
- Perfect Material: VGUBLG Shoelaces for Sneakers are made of soft and long-lasting polyester…
- Classic Colors: VGUBLG offers a total of 27 colors, including black shoe laces for sneakers, perfect…
- Length Fit: 1 Pair(2 laces). Approximately 137cm length flat black trainer shoelaces, suitable…
How to tie shoelaces: the standard bow, step by step
The everyday shoelace knot goes by many nicknames, including “bunny ears” and “loop, swoop and pull”. According to Ian’s Shoelace Site, it appears in The Ashley Book of Knots as “The Bowknot”. The site notes that when it is tied unbalanced, it “sits crooked and comes undone more easily”, which is why the starting knot matters so much.
The loop, swoop and pull method
- Hold one lace in each hand and cross them to make an X.
- Tuck the top lace under the bottom lace and pull both ends outward until the starting knot sits snug against the tongue.
- With one lace, fold a loop about a few inches long and pinch its base between your thumb and finger.
- Wrap the other lace around the front of that loop.
- Push the wrapping lace through the small gap behind the loop to form a second loop.
- Hold one loop in each hand and pull them outward to tighten.
- Check that the finished bow lies across the shoe rather than along it.
The bunny ears method
Bunny ears is often taught to young children because both hands do the same thing. It produces the same knot as the method above.
- Tie the starting knot as in steps 1 and 2 above.
- Make a loop with each lace so you hold two “ears”.
- Cross the ears to form an X.
- Tuck one ear under the other and through the hole at the bottom of the X.
- Pull both ears outward to tighten.
The granny knot: why some bows always come loose
If your laces seem to come untied far more often than anyone else’s, you may be tying a granny knot. Ian’s Shoelace Site explains that a granny knot happens when the starting knot and the finishing bow are tied in the same direction. A reef knot, also called a square knot, has them tied in opposite directions. The site quotes the Oxford English Dictionary’s definition of a granny knot as “a reef knot with the ends crossed the wrong way (and therefore liable to slip).”
How to spot one
The tell is the angle of the bow. Per Ian’s Shoelace Site, a granny-knotted bow sits crooked, “lying along the shoe from heel to toe”, while a balanced bow lies “across the shoe from left to right”. Look down at your shoes right now: if the loops point toward your toes and heel, that is the sign.
How to fix it
- Untie the bow and the starting knot.
- Notice which lace goes over the other when you start. For example, left over right.
- Reverse it: if you normally pass left over right, pass right over left instead.
- Tie the loops exactly as you always do.
- Check that the bow now sits across the shoe.
The site passes along a Scouting mnemonic for the reef knot: “Right-over-left, left-over-right, makes a knot both tidy and tight.” Changing a habit you have had since childhood can feel awkward for a few days, but the rest of your tying motion stays the same. A granny knot is not just as secure as a balanced one, so this small switch is worth making.
The Ian Knot: a faster way to tie the same bow
The Ian Knot was developed by Ian Fieggen, who calls himself “Professor Shoelace”, in 1982. On his site he describes it as the “World’s Fastest Shoelace Knot”. That speed claim is the creator’s own description rather than an independent measurement. He also says the finished knot is identical to the standard knot, so it holds the same way once tied.
The appeal is that both hands form loops at the same time instead of one after the other. As it is commonly described:
- Tie the starting knot as usual.
- Form a loop in each lace at the same time, using both hands.
- Cross the two loops over each other.
- Pass each loop through the gap held open by the other hand.
- Pull both loops outward together to tighten.
Ian’s Shoelace Site has detailed diagrams for each hand position, and they are worth looking at if the written version feels abstract. As with the standard bow, the starting knot direction still decides whether the result is balanced or a granny.
Why shoelaces come untied: what the Berkeley study found
UC Berkeley mechanical engineers led by Oliver O’Reilly, working with graduate student Christine Gregg, published a study on this question in Proceedings of the Royal Society A on 11 April 2017. Berkeley’s news story about it was titled “Shoe-string theory”.
According to UC Berkeley News, the researchers found that “a double whammy of stomping and whipping forces” first loosens the knot and then tugs on the free ends of the laces. Once the loosening begins, “knot failure happens in a matter of seconds”, in as few as two strides.
Two details from the article help explain everyday experience:
- Impact. When running, “your foot strikes the ground at seven times the force of gravity”, per the Berkeley article. That repeated stomping is what starts the knot working loose.
- Knot type. The bow based on a square knot is the stronger version. The “false knot” version, with same-handedness crossings, is the weaker one. That lines up with the granny-knot advice above: a balanced bow is the better starting point.
The practical takeaway is simple. Since failure can happen quickly once a knot starts to loosen, the most useful habit is tying a balanced bow from the start and pulling it properly tight.
The double knot and other ways to keep laces tied
How to double knot
A double knot is a common method for extra hold, especially for children’s shoes, running and hiking.
- Tie a standard bow and pull it snug.
- Take the two loops and tie them together in a simple overhand knot.
- Pull the loops gently to tighten the second knot.
The trade-off is that a double knot is harder to untie, particularly after the laces get wet or muddy. To undo it, loosen the second knot first with a fingernail before pulling a tail.
Other common fixes
- Check the bow angle first. A double knot on top of a granny knot still starts from a weaker base.
- Swap slick laces. Some round, shiny laces slip more than flat, textured ones. Swapping laces is a common fix for a pair that keeps coming undone.
- Tuck long tails. Long, whipping ends are part of the problem the Berkeley team described. Shorter tails or tucked loops give the laces less to swing around.
- Consider elastic laces. For kids, older relatives or anyone who finds bows fiddly, Elastic No Tie Shoelaces on Amazon turn lace-ups into slip-ons. They are a convenience option rather than a performance claim.
Which knot for which shoe
- Everyday sneakers: a balanced standard bow or Ian Knot.
- Running shoes: a balanced bow, with a double knot if the laces are long or slippery.
- Dress shoes: a neat, balanced bow with short tails. Thin waxed laces look tidiest. For upkeep, see How to Clean Leather Shoes and Keep Them Conditioned.
- Boots: a balanced bow, double-knotted if the laces are long enough. Tuck the tails into the boot shaft if they drag.
- Suede shoes: laces are often the first thing to look worn. Our guide to How to Clean Suede Shoes (Without Ruining Them) covers the uppers.
Tight laces should feel secure, not painful. If a pair pinches no matter how you lace it, the fit may be the issue rather than the knot; How to Stretch Shoes That Are Too Tight covers common ways to ease a snug pair.
Thrift note: re-lacing secondhand shoes
Laces are often the most worn part of a thrifted pair. Frayed tips, grey-brown discolouration and stretched cord are common, and replacing them is one of the cheapest ways to make secondhand sneakers look fresh. Pull the old laces out entirely before cleaning; this lets you wash the tongue and eyelets properly. Our step-by-step guide to How to Clean Shoes from the Thrift Store covers disinfecting and deodorising used pairs. When you re-lace, start from the toe, keep both ends even, and finish with a balanced bow.
Once you have the knot sorted, other small skills come in handy for getting dressed quickly. Our guides on How to Tie a Tie and How to Tuck In a Shirt cover two more.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
FAQ
How do I tie a shoe if I am left-handed?
The steps are the same; many left-handed people simply mirror them. What matters is the result: a bow that sits across the shoe. If yours sits lengthwise, reverse the direction of the starting knot.
Is a granny knot really weaker?
Ian’s Shoelace Site says an unbalanced bow “sits crooked and comes undone more easily”, and the OED definition it quotes describes the granny knot as “liable to slip”. The Berkeley study likewise found the same-handedness “false knot” version to be the weaker one.
Is the Ian Knot more secure than the standard bow?
According to its creator, the finished Ian Knot is identical to the standard knot, so the difference is in how quickly it is tied, not how well it holds. The speed claim is the creator’s own.
Why do my laces come undone when I run?
UC Berkeley News reports that stomping and whipping forces loosen the knot and pull on the free ends, and that once loosening starts, failure can happen in as few as two strides. Running adds impact of “seven times the force of gravity”, per the article.
How tight should shoelaces be?
Snug enough that your heel does not lift much as you walk, but not so tight that the top of your foot aches or tingles. Adjust the crossings along the shoe before tying rather than relying on the bow alone.
How do I teach a child to tie shoes?
Many families start with bunny ears, since both hands make the same shape. Practising on a shoe placed on a table, rather than on their foot, is a common method that lets them see what their hands are doing.