Five knots cover almost every collar, tie and occasion you are likely to meet, and each one comes down to a short sequence of crosses, wraps and tucks you can learn in front of a mirror.
Learning how to tie a tie looks harder than it is. Every necktie knot uses the same small set of moves: the wide end crosses over or under the narrow end, wraps around the neck loop, and finally drops down through a band at the front. Change the order and number of those moves and you get a different knot shape. This guide walks through five knots step by step, from the quick four-in-hand to the broad full Windsor, explains how to pick a knot for your collar and tie, and covers length, the dimple, common mistakes and how to look after your ties. If you are putting together a whole formal outfit, our Men’s Formal Wear hub covers suits, shirts and shoes around the tie.
The steps below are a common method, written for a right-handed person looking in a mirror, with the wide end starting on the right. If you are left-handed, simply swap left and right throughout. There is no single correct knot for every situation; the best one is the one that suits your collar, your tie’s thickness and the event.
What you need before you start
- A necktie. Any standard tie works for learning. A medium-weight silk or polyester tie is easiest because it holds a crease and slides smoothly. If you need one, browse Mens Silk Necktie on Amazon options in a plain colour to practise with.
- A collared shirt, buttoned to the top. Turn the collar up before you start, then fold it back down over the tie once the knot is done. Our guide to Mens Dress Shirts explains collar styles if you are shopping for one.
- A mirror. Practising in a mirror helps you see which side is which, though once a knot becomes habit most people can tie it by feel.
- A few minutes. Expect a couple of attempts before the length comes out right. That is normal for every knot here.
The parts of a tie
A few terms make the steps easier to follow. The wide end (also called the blade) is the broad end that shows at the front once the knot is tied. The narrow end (the tail) sits behind it. The neck loop is the part of the tie circling your neck under the collar. The front band is the horizontal strip of fabric that forms across the front of the knot just before the final tuck. Most ties also have a keeper loop on the back of the wide end, which holds the narrow end in place.
How long should a tie be?
Retailers such as Tie Mart commonly describe a regular tie as about 57 to 58 inches long, with extra-long ties running about 61 to 63 inches. That is a retail convention rather than a fixed standard, so lengths vary between brands and vintage pieces often run shorter. Taller people, or anyone who likes larger knots such as the full Windsor, may find an extra-long tie easier; Extra Long Necktie on Amazon listings usually state the length in the description.
A common styling guideline is that the tip of the wide end should land at your belt buckle or the top of your waistband once the knot is tied. Slightly above or below is fine; the point is to avoid a tie that stops at mid-stomach or hangs well below the belt.
How to tie a tie: the five knots step by step
The knots are listed roughly from smallest and simplest to largest and most involved. If you only learn one, make it the four-in-hand. If you want a second, the half Windsor is the most versatile companion. For a closer look at the two Windsor variations, see our dedicated guide on How to Tie a Windsor Knot (and a Half Windsor).
1. The four-in-hand knot
The four-in-hand is the quickest and most widely used knot. It is slim, slightly asymmetric and works with nearly every collar and tie, especially thicker woven or wool ties that would look bulky in a larger knot.
- Drape the tie around your neck with the wide end on your right, hanging about 12 inches lower than the narrow end.
- Cross the wide end over the front of the narrow end, from right to left.
- Bring the wide end back underneath the narrow end, returning it to the right.
- Cross the wide end over the front again, from right to left. This forms the front band.
- Bring the wide end up through the neck loop from underneath.
- Hold the front band open with a finger and pass the wide end down through it.
- Hold the narrow end and gently slide the knot up toward the collar.
- Check that the tip of the wide end reaches your belt. If it is too short or too long, untie and adjust the starting length.
Because the four-in-hand uses so little fabric, it leaves more length in the wide end. If your tie keeps finishing too long, start with the wide end a little higher.
2. The half Windsor knot
The half Windsor is a medium-sized, near-symmetrical triangle. It sits between the four-in-hand and the full Windsor in size and suits most standard and semi-spread collars, which makes it a sensible everyday choice for the office, interviews and weddings.
- Drape the tie with the wide end on your right, hanging well below the narrow end.
- Cross the wide end over the narrow end, from right to left.
- Bring the wide end around behind the narrow end, back to the right.
- Bring the wide end up toward the neck loop and pull it down through the loop from the front, so it ends up on the right side.
- Bring the wide end across the front of the knot, from right to left, forming the front band.
- Bring the wide end up through the neck loop from underneath.
- Pass the wide end down through the front band.
- Hold the narrow end and slide the knot up to the collar, shaping it into a triangle as you go.
3. The full Windsor knot
The full Windsor (sometimes called the double Windsor) is a large, wide and symmetrical triangle. It looks at home with spread and cutaway collars, where a small knot would leave gaps, and with thinner silk ties that need extra bulk. It uses the most fabric of the five, so it can leave a regular tie short on taller wearers.
- Drape the tie with the wide end on your right, hanging noticeably lower than the narrow end.
- Cross the wide end over the narrow end, from right to left.
- Bring the wide end up through the neck loop from underneath and pull it down on the left.
- Pass the wide end behind the narrow end, from left to right.
- Bring the wide end up toward the neck loop and pull it down through the loop on the right.
- Bring the wide end across the front, from right to left, forming the front band.
- Bring the wide end up through the neck loop from underneath.
- Pass the wide end down through the front band.
- Tighten slowly by holding the narrow end and sliding the knot up, keeping both sides even.
4. The Pratt knot (also called the Shelby)
The Pratt is a tidy, medium-sized knot that is a little more symmetrical than the four-in-hand and smaller than the half Windsor. Its distinctive feature is that you start with the tie inside out, so the seam faces away from your shirt.
- Drape the tie with the seam facing outward and the wide end on your right, hanging a little below the narrow end.
- Cross the wide end underneath the narrow end, from right to left.
- Bring the wide end up over the neck loop and down through it, so it hangs back on the left.
- Pull the wide end down and to the left to snug the first part of the knot.
- Cross the wide end over the front, from left to right, forming the front band.
- Bring the wide end up through the neck loop from underneath.
- Pass the wide end down through the front band.
- Hold the narrow end and slide the knot up to the collar.
5. The Kelvin knot
The Kelvin is a small, slightly fuller variation on the four-in-hand. Like the Pratt, it starts inside out, and it adds one extra wrap, which gives it a rounder, more balanced look than the four-in-hand without the bulk of a Windsor. It suits narrow ties and button-down or point collars.
- Drape the tie with the seam facing outward and the wide end on your right.
- Cross the wide end underneath the narrow end, from right to left.
- Bring the wide end across the front, from left to right.
- Bring the wide end back underneath the narrow end, from right to left.
- Cross the wide end over the front again, from left to right. This is the front band.
- Bring the wide end up through the neck loop from underneath.
- Pass the wide end down through the front band.
- Hold the narrow end and slide the knot up, adjusting until the wraps lie flat.
Choosing a tie knot: a quick comparison
Knot choice mostly comes down to three things: how far apart your collar points sit, how thick the tie is, and how much length you have to spare. This table sums up the five knots above; treat it as common styling guidance rather than a rulebook.
| Knot | Size and shape | Pairs well with | Difficulty |
|---|---|---|---|
| Four-in-hand | Small, slightly asymmetric | Point and button-down collars, thick or knitted ties | Easiest |
| Kelvin | Small, rounder than the four-in-hand | Point collars, narrow ties | Easy |
| Pratt (Shelby) | Medium, fairly symmetrical | Point and semi-spread collars, most ties | Easy to moderate |
| Half Windsor | Medium triangle | Semi-spread and standard collars, medium ties | Moderate |
| Full Windsor | Large, wide triangle | Spread and cutaway collars, thin silk ties | Most steps |
A useful rule of thumb: the wider the gap between your collar points, the larger the knot can be. A small knot in a wide spread collar can leave the tie looking lost, while a big Windsor squeezed into narrow points tends to push the collar out of shape.
Matching the knot to the occasion
Occasion matters less than collar and tie, but some patterns hold. For a job interview, a neat half Windsor or four-in-hand in a solid or subtle tie reads polished without drawing attention; our guide on What to Wear to an Interview covers the rest of the outfit. For a wedding, any of the five works as long as it sits snugly at the collar; see What Men Should Wear to a Wedding as a Guest, by Dress Code for dress-code notes. For funerals and other sombre occasions, a dark tie in a simple four-in-hand or half Windsor keeps the look quiet, as discussed in Funeral Attire for Men. For black tie events, a necktie is usually replaced by a bow tie; our step-by-step guide on How to Tie a Bow Tie explains how.
The dimple, the tie bar and other finishing touches
How to add a dimple
A dimple is the small fold or crease just below the knot. It adds depth and helps the tie drape. A common method: just before you pull the wide end fully through the front band in the final step, press your index finger into the centre of the fabric directly below the knot, pinch the edges slightly around it, and keep that pressure as you tighten. Some people prefer a single centred dimple, others two small ones, and plenty of people skip it entirely, especially with knitted ties where it does not hold well.
Where the narrow end goes
Once the knot is tied, tuck the narrow end through the keeper loop on the back of the wide end. If the narrow end hangs below the wide end, the starting length was off; untie and start again with the wide end a little lower rather than tucking excess into your trousers.
Tie bars and clips
A tie bar holds both ends of the tie to the shirt placket. It is commonly worn between the third and fourth shirt buttons and should be narrower than the tie itself. It is optional, but practical on windy days or when leaning over a desk or table. A simple Tie Clip Bar Men on Amazon in silver or gold tone is an easy addition to a work wardrobe.
Common tie-knot mistakes and how to fix them
- The tie finishes too short or too long. This is the most common problem. Adjust the starting position of the wide end by an inch or two and retie. Larger knots use more fabric, so start the wide end lower for a Windsor than for a four-in-hand.
- The knot is loose or slips. Hold the narrow end firmly while sliding the knot up, and make sure the final tuck goes through the front band rather than beside it.
- The knot sits crooked. Check that the neck loop is even on both sides under the collar, then centre the knot by gently tugging the narrow end.
- The collar shows a gap above the knot. Slide the knot fully up so it closes over the top button. If it still gaps, the knot may be too small for a spread collar; try a half or full Windsor.
- The knot is too bulky. Thick, lined or wool ties can make large knots look oversized. Switch to a four-in-hand or Kelvin.
- The narrow end peeks out. Use the keeper loop, or a tie bar, to keep it behind the wide end.
- Wrinkles across the knot. Tighten in stages rather than all at once, smoothing the fabric with your fingers as the knot closes.
A short history of tie knots
How many tie knots are there?
In the late 1990s, Thomas Fink and Yong Mao, research fellows at Cambridge University’s Cavendish Laboratory, used mathematics to show that there are 85 distinct knots possible with a conventional necktie. Their work appeared in scientific papers and then in the 1999 book The 85 Ways to Tie a Tie. According to summaries of the book, they singled out 13 of those knots as aesthetically pleasing based on shape, symmetry and balance.
The count did not stay at 85. In 2014, a team led by Mikael Vejdemo-Johansson at KTH Royal Institute of Technology in Stockholm argued that the 1999 model was too restrictive, since it allowed only one tuck and a limited number of windings. Phys.org reported that the work was prompted by an unusual knot seen in The Matrix Reloaded. The first version of their preprint counted 177,147 tie knots, a figure later revised upward in the revised paper. In other words, the number depends on what you count as a knot, and for everyday dressing the five above are plenty.
Where the Pratt knot came from
The Pratt knot is credited to Jerry Pratt, a US Chamber of Commerce employee, who created it in the late 1950s. Decades later he taught it to Don Shelby, a news anchor at WCCO-TV in Minneapolis, which is why it is also known as the Shelby knot. Accounts differ on the timing of that meeting: Wikipedia puts it in 1986, while Twin Cities Business describes Pratt calling Shelby in the late 1980s to criticise the anchor’s knot and showing him one tied with the seam facing out. The knot became widely known after a New York Times article in 1989, and coverage, as Twin Cities Business put it, ranged from the New York Times to Playboy. So the knot was publicised in 1989, but it was not invented then.
The Windsor knot and the duke who did not tie it
The Windsor knot is named after the Duke of Windsor, but by most accounts he did not use it. Summaries of his 1960 memoir A Family Album say he preferred a large knot and, in the 1920s, had broad ties made with an extra thickness of material to produce that effect, tying them as a four-in-hand. A City of Sacramento youth workforce handout on tying ties makes the same point: the duke liked a wide triangular knot but got it from specially made thick ties rather than from the knot that now carries his name. Because these accounts come through secondary summaries, treat the details as the commonly reported version of the story.
Tie care and storage
A well-kept tie lasts for years, which makes ties one of the best things to look for at thrift and vintage shops. A few habits help:
- Untie it properly. Reverse the steps of the knot instead of yanking the narrow end through, which stretches the fabric and the interlining.
- Let it rest. Hang or roll a tie after wearing so creases from the knot can relax before you wear it again.
- Store it hanging or rolled. A tie rack or a drawer of loosely rolled ties both work. For travel, rolling a tie and tucking it into a shoe or a corner of the bag keeps it from creasing; see our guide on How to Pack a Suitcase (Including a Suit).
- Check the label before cleaning. Many silk ties are labelled dry clean only. Spot-treat small marks gently and follow the care label.
- Use low heat, with care. If a tie needs pressing, use a low setting suited to the fibre, ideally steam held just above the fabric or a pressing cloth, so the rolled edges stay soft rather than flattened. Our How to Iron a Shirt in 7 Steps guide explains the iron temperature dots found on care labels.
Buying ties secondhand
Thrift stores often have racks of ties at low prices, and vintage ties come in widths and patterns that are hard to find new. Check the back for loose stitching, look at the tip for wear, and hold the tie up to see whether it hangs straight. Older ties are often shorter than current retail lengths, so a vintage piece may suit a four-in-hand better than a full Windsor. Browse our Men’s Thrift Store Shopping guide for tips on shopping the men’s section.
Frequently asked questions
What is the easiest way to tie a tie?
The four-in-hand is generally considered the easiest knot. It has the fewest steps, works with most collars and ties, and leaves plenty of length. Learn it first, then move on to the half Windsor.
Which tie knot is most formal?
Larger, symmetrical knots such as the full Windsor and half Windsor are often seen as more formal-looking, while the four-in-hand reads more relaxed. In practice, a neatly tied four-in-hand is appropriate almost anywhere a tie is expected. At black tie events, a bow tie usually replaces the necktie.
Where should the tip of the tie end?
A common guideline is at the belt buckle or the top of the waistband. Adjust the starting length of the wide end until you land there consistently.
Why does my tie always end up too short?
Either the starting length is off or the knot uses more fabric than the tie can spare. Start with the wide end lower, choose a smaller knot, or look for an extra-long tie, which retailers commonly list at about 61 to 63 inches.
Can I tie a tie on myself the same way as on someone else?
The steps are the same, but tying a tie on another person reverses left and right from your point of view. Many people find it easier to stand behind the other person and tie it as if on themselves.
Is the Windsor knot named after the Duke of Windsor?
Yes, but by most accounts he did not tie it. Summaries of his memoir say he achieved a large knot with specially made thick ties tied as a four-in-hand.
How many ways are there to tie a tie?
Fink and Mao counted 85 in their 1999 work. A 2014 study using a broader model counted 177,147, a figure later revised upward. For everyday wear, the five knots in this guide cover nearly every need.
Should I loosen or fully untie my tie at the end of the day?
Fully untying it by reversing the steps is gentler on the fabric than sliding a loosened knot over your head and leaving it tied, which keeps the creases locked in.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.