Working in a set order, from the collar to the body, keeps freshly pressed sections from getting creased again and turns ironing a shirt into a quick routine.
Knowing how to iron a shirt well comes down to two things: the right heat for the fabric and a sensible order of work. This guide covers how to read the care label, the seven steps of a common collar-to-body method, and the mistakes that leave shiny patches or new creases. If you do not own an iron or are short on time, our guide on How to Get Wrinkles Out of Clothes Without an Iron covers steam, dryer and spray methods instead.
Check the care label first
In the US, the Federal Trade Commission’s Care Labeling Rule says that if a garment needs regular ironing, its care label must give ironing information. If a hot iron would harm the garment and people might be tempted to touch it up, the label should say “Do not iron.” Care symbols, under the ASTM D5489 standard, are optional, so some labels use words and others use pictures.
The iron symbol uses dots to show temperature. According to commonly cited summaries of the international ISO 3758 / GINETEX system, the dots roughly mean:
| Symbol | Approximate temperature | Typical fabrics |
|---|---|---|
| Iron with 1 dot | About 110 °C | Synthetics, silk |
| Iron with 2 dots | About 150 °C | Wool, blends |
| Iron with 3 dots | About 200 °C | Cotton, linen |
| Iron crossed out | Do not iron | Varies |
Treat these as a guide and follow the garment’s own label first. If a shirt is a blend, set the iron for the most delicate fibre in it, and test on an inside seam or hem if you are unsure.
What you need
- An iron with temperature settings, ideally with steam. A basic Steam Iron For Clothes on Amazon is enough for shirts.
- An ironing board, or a heat-safe padded surface such as a folded towel on a table.
- Water for the steam tank or a spray bottle for misting dry patches.
- A pressing cloth (optional), such as a clean cotton handkerchief, for dark or delicate fabrics.
- A hanger ready to take the shirt the moment you finish.
Top-selling match on Amazon

- Anti-Drip Smartstream Technology: Engineered to prevent dripping by maintaining water at the proper temperature needed…
- Trueglide Nonstick Soleplate: The enhanced soleplate is designed to glide smoothly across all fabric types for…
- Spray Mist: This push-button mister helps moisten fabrics to tackle and smooth away deep…
How to iron a shirt: 7 steps
The order below, collar, cuffs, sleeves, yoke, then body, is a common method. Starting with the small, stiff parts and finishing with the large panels means you are less likely to crease areas you have already done.
- Prepare the shirt. Start with a slightly damp shirt, or mist a dry one lightly with water. Unbutton everything, including cuffs and collar buttons, and remove any collar stays. Set the iron to the temperature on the care label and let it heat up.
- Iron the collar. Lay the collar flat, underside up, and iron from the points toward the centre so any creases are pushed inward rather than out to the tips. Flip it and repeat on the outside.
- Iron the cuffs. Open each cuff flat and iron the inside, then the outside, working around the buttons rather than over them.
- Iron the sleeves. Lay one sleeve flat along the board, lining up the seam so the sleeve lies smooth. Iron from the shoulder down to the cuff. Turn it over and do the other side, then repeat with the second sleeve. Whether to press a sharp crease along the top of the sleeve is a style preference.
- Iron the yoke. Drape the shoulder area over the narrow end of the board and iron the yoke, the panel across the upper back and shoulders, one side at a time.
- Iron the body. Start with one front panel, working around buttons with the tip of the iron. Slide the shirt along to iron the back, then finish with the other front panel. Press the placket last so the button line stays crisp.
- Hang it straight away. Put the shirt on a hanger while it is still warm and fasten the top button so the collar keeps its shape. Let it cool before wearing or putting it away.
Tips for a smoother finish
- Keep the iron moving. Leaving it in one spot risks scorch marks, especially at high settings.
- Iron dark shirts inside out or under a pressing cloth to reduce shine.
- Use steam for stubborn creases. A burst of steam relaxes fibres faster than heat alone. A spray bottle works if your iron has no steam function.
- Do the cool fabrics first. If you are ironing several items, start with those that need a low setting and work up, since irons heat faster than they cool.
- Use spray starch if you like a crisp finish. It is optional; a Spray Starch For Ironing on Amazon gives cotton shirts more body.
Top-selling match on Amazon
Common ironing mistakes
- Using too much heat. Too hot a setting can melt synthetics or scorch cotton. When in doubt, start lower.
- Ironing over stains. Heat can set stains permanently. Treat and wash stains first; our guide to How to Get Sweat Stains Out of Shirts (Yellow and Underarm Stains) explains why heat should wait until a stain is gone.
- Ironing over buttons. Pressing directly on buttons can crack them and leave marks. Work around them.
- Folding or wearing it hot. A warm shirt creases easily. Let it cool on the hanger first.
- Ignoring “Do not iron”. Some fabrics and prints cannot take heat. Try a steamer or the methods in our no-iron guide instead.
Keeping shirts wrinkle-free for longer
Remove shirts from the dryer promptly and hang them, store them with a little space between hangers, and fold them carefully for travel; see How to Fold Shirts and How to Pack a Suitcase (Including a Suit) for packing folds. If you are building a work wardrobe of Mens Dress Shirts, a quick press before wearing is often all they need, and a pass with a lint roller finishes the job; see How to Remove Lint From Clothes for other options.
Frequently asked questions
What temperature should I iron a cotton shirt?
Check the label. Cotton is commonly listed under the three-dot setting, about 200 °C according to summaries of the ISO 3758 system.
Should a shirt be damp when ironing?
Slightly damp fabric, or steam, generally makes creases easier to remove. Mist a dry shirt lightly if your iron has no steam.
What order should I iron a shirt?
A common method is collar, cuffs, sleeves, yoke, then body.
Can I iron a polyester shirt?
Often yes, on a low setting. Synthetics are commonly listed under one dot, about 110 °C. Follow the label and use a pressing cloth.
How do you iron a linen shirt without leaving creases?
Linen irons best while it is still damp, on the high three-dot setting the care label usually gives for linen. Mist a dry shirt thoroughly or use plenty of steam, then follow the same order as cotton: collar, cuffs, sleeves, yoke and body. Iron dark linen inside out or under a pressing cloth to avoid shine, and keep the iron moving. Hang the shirt straight away and let it cool, since linen creases easily and folding it warm undoes the work.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
Browse picks on Amazon →Steaming & Static
Steam clothes and stop static cling.
