Most jeans never need an iron. When they do, for a crisp crease or a stubborn wrinkle after the dryer, a few label checks and a lower setting than you might expect will keep dark indigo from turning shiny.
Knowing how to iron jeans starts with knowing whether you should. Many pairs come out wearable if they are hung while damp, and Levi’s denim-care page gives no general ironing guidance at all. When you do want a pressed look, the care label sets the limit, and a common method of ironing inside out while the denim is slightly damp keeps the face from picking up shine. This page covers reading the label, a step-by-step method, adding a crease, steaming as an alternative, and when to leave the iron in the cupboard. For washing first, see our How to Wash Jeans (and How Often) hub.
Quick answer
| Step | What to do |
|---|---|
| Check | Read the care label and iron symbol first |
| Temperature | Match the dots; lower for stretch blends |
| Prep | Inside out, slightly damp |
| Press | Waistband and pockets, then legs |
| Finish | Hang immediately so creases set |
Read the label first
The FTC’s Care Labeling Rule says that if a product needs regular ironing, the label must give ironing instructions, and if a hot iron would harm it, the label should say “Do not iron.” So the label is your first and best guide.
Most labels use the iron symbol with dots. Under the ISO 3758 / GINETEX system, as summarised by Wikipedia, one dot means about 110 °C, two dots about 150 °C, and three dots about 200 °C, the setting for cotton and linen. Follow the label over any general rule here.
| Iron symbol | Approx. maximum |
|---|---|
| 1 dot | 110 °C |
| 2 dots | 150 °C |
| 3 dots | 200 °C (cotton, linen) |
| Crossed-out iron | Do not iron |
Rigid 100% cotton denim often allows the higher setting. Stretch denim contains elastane, and fabric-care guidance warns that heat can damage spandex, so use a lower setting on blends even if the label allows more. Our Types of Denim guide explains rigid versus stretch.
How to iron jeans (step by step)
This is a common method rather than an official one:
- Check the care label and set the iron to the matching dot setting, or lower for stretch.
- Turn the jeans inside out.
- Make sure they are slightly damp; mist dry spots with a spray bottle.
- Press the waistband first, sliding it over the narrow end of the board.
- Press the pocket bags flat so they don’t leave ridges on the front.
- Lay one leg flat along the board with the seams aligned.
- Press from the top of the leg down to the hem, lifting and placing the iron rather than dragging.
- Repeat on the other side of that leg, then the second leg.
- Turn the jeans right side out.
- Hang them straight away and let them cool before wearing.
Ironing inside out while damp is commonly recommended to limit shine on dark indigo. A pressing cloth adds another layer of protection if you must press the face: Pressing Cloth For Ironing on Amazon.
Top-selling match on Amazon
- Blouses To Quilting Projects: This pressing cloth for ironing works for dress shirts, quilt blocks, embroidered…
How to iron a crease into jeans
A front crease is a style choice, common on dressier dark denim and workwear. A common method:
- Line up the inseam and outseam of one leg so they sit on top of each other.
- Lay the leg flat on the board; the fold lines at front and back become the creases.
- Cover with a pressing cloth if pressing on the outside.
- Press firmly along the fold from hem to just below the pocket.
- Repeat on the other leg, then hang by the hem or over a bar to keep the line.
Creases are hard to remove from dark indigo once set, and the fold line can fade faster over time, so try it on a pair you don’t mind marking.
Steam jeans instead
Steaming relaxes wrinkles without pressing the face of the fabric, which avoids shine. Hang the jeans, then pass a handheld steamer over them from top to bottom, gently pulling the fabric taut. Maytag notes that hanging a garment in a closed bathroom during a hot shower relaxes lighter wrinkles in about 15 minutes. The FTC notes that if steam would damage a garment, the label should say so. See How to Steam Clothes (Handheld Steamer or Shower) and How to Get Wrinkles Out of Clothes Without an Iron for more. A compact option: Handheld Garment Steamer on Amazon.
Top-selling match on Amazon
- 💨【INSTANT WEAR HANDHELD STEAMER】Running late? Get ready in minutes. This 1200W handheld…
- ✨【2-IN-1 GARMENT STEAMER & IRON】 Featuring a 90° rotatable head for smooth gliding at any…
Quick fixes without a full press
Sometimes only one area needs attention. These common methods save time:
- Behind-the-knee wrinkles: mist the area, pull the fabric taut by hand and hang the jeans for half an hour.
- Waistband roll: press the inside of the waistband flat on a medium setting, keeping in mind that heat on a damp waistband can tighten it slightly.
- Pocket-bag ridges: press the pocket bags from the inside only.
- Hem flare after washing: press the hem flat from the inside with a pressing cloth. If the hem itself is the problem, see How to Hem Jeans and Keep the Original Hem.
When not to iron jeans
- When the label shows a crossed-out iron.
- Over patches, prints, studs or heat-transfer labels on the outside.
- On high heat with stretch denim.
- On raw denim you are breaking in, if you want the natural creases to form.
- When they are going to be worn and creased within minutes anyway.
Levi’s mentions spot-ironing damp areas such as the waistband as one way to shrink jeans a little, so be aware heat on a damp waistband can tighten it. If that is your goal, How to Shrink Jeans explains more.
Thrift notes
Vintage jeans often carry decades-old creases, especially down the front from previous owners. Wash and dry them first, then decide. Our How to Dry Jeans Without Shrinking or Fading page explains hanging damp to cut down ironing, and How to Store Jeans covers storage that keeps wrinkles away.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
FAQ
Should you iron jeans inside out?
That is the common advice, to limit shine on dark indigo. Use a pressing cloth if you press the outside.
What temperature should I iron jeans at?
Follow the care label dots. Three dots is about 200 °C for cotton; use lower for stretch blends.
Can you iron stretch jeans?
Usually on a low setting, if the label allows it, since heat can damage spandex.
Is steaming better than ironing jeans?
Steaming avoids shine and is faster for light wrinkles; ironing gives a sharper crease.