Guides

How to Hem Jeans and Keep the Original Hem

How to Hem Jeans and Keep the Original Hem

Jeans are often sold longer than many people wear them, and shortening them at home is a manageable job, including the method that keeps the worn-in factory hem.

This guide explains how to hem jeans two ways: the common original-hem method, which keeps the factory fade and topstitching at the bottom of the leg, and a standard turned-up denim hem. Start by deciding how long you want them; our How Long Should Men’s Jeans Be? Length Guide by Style guide covers length and break choices for different cuts and shoes. For dress trousers and other fabrics, see How to Hem Pants.

What you need

  • A soft tape measure and pins or clips
  • Tailor’s chalk or a washable marker
  • Sharp fabric scissors
  • A sewing machine with a denim (jeans) needle, or a heavy hand needle
  • Heavy-duty or topstitching thread in a colour close to the original
  • An iron

A Denim Sewing Machine Needles on Amazon pack and a spool of Jeans Topstitching Thread Gold on Amazon cover the specialist parts.

Top-selling match on Amazon

Simthread Heavy Duty Blue Jeans Thread for Denim Sewing 1000 Meters Gold

Simthread Heavy Duty Blue Jeans Thread for Denim Sewing 1000 Meters Gold

  • Simthread heavy duty blue jean thread is made of 100% polyester, in gold color shade, 1000…
  • Colorfast and washable
$9.99(as of November 2026)Check price on Amazon

Top-selling match on Amazon

30PCS Size 90/14 100/16 110/18 Universal Sewing Machine Needles | Heavy Duty Sewing Machine Needle for Thick F

30PCS Size 90/14 100/16 110/18 Universal Sewing Machine Needles | Heavy Duty Sewing Machine Needle for Thick Fabric…

  • Universal For Sewing Machine: Our sewing machine needles are suitable for most home sewing machines
  • Heavy Duty Size: 30Pcs heavy duty sewing machine needles. 10pcs Size 90/14 for thin and thick fabrics…
  • Premium Material: Made of strong iron alloy, sturdy and durable, which has high hardness, sharp needle…
$8.97(as of November 2026)Check price on Amazon

Step 1: Mark the new length

  1. Put the jeans on with the shoes you will wear most with them.
  2. Fold the hem under until it lands where you want it.
  3. Pin it at the front of each leg.
  4. Take the jeans off and measure the new inseam from the crotch seam to the fold.
  5. Measure the distance between the current hem edge and the fold. This is how much you are removing.

Our How to Measure Inseam (for Pants and Jeans) guide explains measuring the inseam accurately.

Method 1: Keep the original hem

This is a common method rather than an official one, and it is popular because the bottom of the leg keeps its original wash and stitching. The idea: fold up the excess, sew just below the original hem band, and trim.

  1. Turn the jeans right side out.
  2. Fold the extra length up toward the knee so the original hem now sits at your new length, with the fold on the inside.
  3. Measure around the leg to make sure the fold is even, then pin or clip it in place.
  4. Set the machine to a straight stitch with the denim needle.
  5. Sew all the way around the leg as close as you can to the top edge of the original hem band, on the folded fabric, not through the hem band itself.
  6. Repeat on the other leg.
  7. Turn the jeans inside out and trim the excess fold, leaving about 1/2 in of seam allowance.
  8. Finish the raw edge with a zigzag stitch to stop fraying.
  9. Turn right side out, fold the original hem down, and press the seam toward the leg.
  10. Optionally, topstitch just above the join from the right side to keep the seam allowance flat.

On tapered or skinny jeans, the leg is narrower higher up than at the original hem, so the hem band may be slightly wider than the leg it is joined to. Easing the extra in as you sew, or taking in the side seam a little, are common workarounds. Wide flares can be harder still, and a tailor may be a better choice.

Method 2: Standard turned-up denim hem

If you do not mind losing the original hem, a double-folded hem is quicker and cleaner on very tapered legs.

  1. Mark the finished length on the leg with chalk.
  2. Add about 1 in below that line and cut. NMSU Extension says pants hems are usually 1 to 2 in deep.
  3. Fold the raw edge up about 1/2 in and press.
  4. Fold again so the first fold sits at the finished length line, and press.
  5. Sew close to the top fold with topstitching thread.
  6. Go slowly over the thick side seams, turning the handwheel by hand if needed.

How to hem jeans by hand

It is possible, but slow, because denim is thick. Use a strong needle, a thimble and heavy thread, and backstitch along the fold for strength. Short, even stitches matter more than speed. For lighter jeans, the hand blind stitch described in our hem pants guide can work, though NMSU recommends it for non-stretch, non-ravelling fabrics.

When to see a tailor

It is common practice to take jeans to a tailor for flared or very tapered legs, chain-stitched hems on raw denim, selvedge jeans you want to keep exactly as made, and any taper or waist change. Many tailors offer an original-hem service.

Common mistakes

  • Cutting before checking the length in shoes. Pin first, try the jeans on with the shoes you wear most, then cut.
  • Sewing through the hem band. For the original-hem method, stitch on the folded fabric just above the band so the old stitching stays visible.
  • An uneven fold. Measure the fold at the front, back and both side seams before you sew.
  • Forcing the machine over side seams. The flat-felled seams on jeans are several layers thick. Slow down and turn the handwheel by hand.
  • Using all-purpose thread for topstitching. It looks thin next to the original stitching. Heavier thread blends in better.
  • Forgetting shrinkage. Raw or unwashed denim may shorten after the first wash, so wash before hemming if the brand suggests it.

Caring for newly hemmed jeans

Wash newly hemmed jeans inside out in cool water and press the hem seam lightly after the first wash so the seam allowance lies flat. On original-hem jeans, the join can show a slight ridge at first; pressing and normal wear usually soften it. Air drying, or a low dryer setting, also helps keep the length you just set. For a broader look at denim fit, our Tall Jeans Inseam hub and Men’s Pants Size Chart guide explain how length and waist labels work.

Thrift note

Long secondhand jeans are an easy win with this skill. Measure the inseam before buying, check that the hem has not already been altered, and remember that vintage denim may shrink if washed hot. Our guides on How to Identify Vintage Levi’s and How to Prevent Clothes From Shrinking in the Wash help, and How to Sew a Button covers the other common thrift fix.

Frequently asked questions

Can you shorten jeans without losing the original hem?

Yes. The common original-hem method folds the excess up, sews just above the original hem band, trims the fold and presses the hem back down.

What needle do I need to hem jeans?

A denim or jeans machine needle is commonly used, with heavy-duty or topstitching thread.

How much should I leave for a jeans hem?

For a turned-up hem, NMSU Extension says pants hems are usually 1 to 2 in deep. For the original-hem method, leave about 1/2 in seam allowance after sewing.

Can you hem jeans without sewing?

Jeans can be shortened without sewing using iron-on fusible hem tape, though the result is less durable than a stitched hem. Mark and cut the new length with a turn-up allowance, fold the edge under, slip the tape inside the fold, and press with a hot iron and a damp press cloth as the tape’s instructions direct. It holds best on lighter, non-stretch denim and may loosen with repeated washing, so it suits a quick fix more than jeans worn and washed often.

Shop the look on Amazon

Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.

Browse picks on Amazon →