A plain tee becomes a crop top with one straight cut, a quick hem or just a knot, and it is an easy first project for anyone new to DIY clothes.
If you are wondering how to crop a t shirt, you have three main routes: cut it with a raw edge, cut and sew a neat hem, or crop it without cutting at all. The no-cut route starts with a knot; our How to Tie a Shirt Knot (Front Knot, Side Knot and More) guide covers front, side and tucked knots in detail. This guide walks through each method step by step, with the measurements and safety points to get right before you pick up the scissors.
The steps below are a common method. Decide on the length with the shirt on, because a crop that looks right flat can feel shorter when worn.
Methods at a glance
| Method | Best for | Effort |
|---|---|---|
| Knot or tuck (no cut) | Trying a length before committing | Easy |
| Raw-edge cut | Cotton jersey tees, a casual look | Easy |
| Cut and stretch | A soft, rolled edge | Easy |
| Sewn hem | A finished, store-bought look | Medium |
| Fusible hem tape | A neat hem without sewing | Easy |
What you need
- A t-shirt. Cotton jersey is the easiest fabric to crop; a pack of Cotton Crew Neck T-Shirt Pack on Amazon gives you spares to practise on.
- Sharp Fabric Scissors on Amazon or a rotary cutter and cutting mat.
- Tailor’s chalk or a washable marker.
- A ruler or tape measure.
- Pins, and a needle and thread or a sewing machine for the sewn hem.
Top-selling match on Amazon
- Arts And Crafts Staple: All Purpose Fiskars Scissors for cutting a wide variety of fabric and crafts…
- Precision Art Supplies: High-grade, precision-ground stainless steel blades offer a sharp edge that cuts all…
- Long Lasting And Reliable: A dependable addition to your quilting supplies and scrapbook supplies; Fiskars…
Top-selling match on Amazon
- 100% Cotton with Tightly Woven Structure Made from 100% pure cotton, these tees feature a…
- Durable Neckline & Tag-Free Comfort Built with a reinforced, shape-retaining collar and a…
Before you cut
- Wash and dry the shirt first. Cotton can shrink a few percent in the wash, so cropping first and washing later can leave it shorter than planned. See Does Cotton Shrink? Why It Happens and How Much.
- Put the shirt on and mark the length you want with a pin.
- Add about an inch below the pin if you plan to hem, since the fold uses up length.
- Take the shirt off and lay it flat on a table, smoothing out wrinkles.
Scissor safety
- Never cut a shirt while you are wearing it.
- Cut on a flat, stable surface, not on your lap.
- Cut away from your body and keep your other hand behind the blade.
- Close scissors and put them away after use, out of reach of children.
- If you use a rotary cutter, always use a cutting mat and close the blade guard between cuts.
How to crop a t-shirt: 5 ways
1. Knot or tuck (no cut)
- Gather the hem at the front or side.
- Twist it and tie a double knot.
- Tuck the knot up under the hem for a cropped look.
This is the way to crop a shirt without cutting, and a good test of the length you like.
2. Raw-edge cut
- Lay the shirt flat with the front and back hems lined up.
- Measure up from the hem to your chosen length at several points.
- Join the marks with a straight chalk line.
- Cut along the line through both layers.
- Try it on and trim any uneven spots.
Knit fabric is commonly described as not fraying much, which is why a raw edge on a jersey tee usually holds up. Woven fabric, such as a button-down, frays more and needs a hem.
3. Cut and stretch
- Cut a raw edge as above.
- Hold the cut edge with both hands.
- Gently stretch it a little at a time all the way round.
- Let the edge curl into a soft roll.
4. Sewn hem
- Cut the shirt about an inch longer than your final length.
- Fold the raw edge up about half an inch and press it.
- Fold it up again and pin.
- Sew close to the inner fold with a zigzag or stretch stitch so the hem can stretch.
- Press the hem flat.
For more on hand stitches, NMSU Extension’s hemming guide describes a hand blind stitch, but notes it suits non-stretch, non-ravelling fabrics, so on a stretchy tee a stretch stitch is usually the better choice. Our How to Hem Pants guide covers the basics of hemming.
5. Fusible hem tape
- Cut the shirt about an inch longer than your final length.
- Fold the raw edge up and press.
- Slip a strip of fusible web inside the fold.
- Press with the iron to bond it.
NMSU Extension advises testing fusible web on a scrap first, not sliding the iron, keeping the web at least 1/4 in from the cut edge, and avoiding it on sheers and laces. A Fusible Hem Tape Iron On on Amazon roll works for this.
Common mistakes
- Cutting too short. Start longer; you can always trim more.
- Cutting without lining up the hems. The back and front end up different lengths.
- Using dull scissors. They chew the fabric and leave a jagged edge.
- Skipping the pre-wash. The crop can end up shorter than planned.
Styling ideas
- A cropped tee with high-rise jeans or a midi skirt.
- A raw-edge crop over a longer tank for layering.
- A cropped tee tucked loosely; see How to Tuck In a Shirt.
- Dye the offcut and the shirt together for a matching scrunchie; How to Tie Dye a Shirt shows how.
If the shirt is also too wide, our How to Make a Shirt Smaller (Sew and No-Sew Options) guide covers taking in the side seams.
Thrift note
Oversized and men’s tees from the thrift store are ideal for cropping because they leave plenty of fabric to work with. Check the fibre content: cotton and cotton-rich jersey cut cleanly, and What Is Jersey Fabric? The Knit Behind T-Shirts explains why the knit behaves the way it does.
Frequently asked questions
How do you crop a shirt without cutting it?
Knot the hem at the front or side and tuck the knot up under the hem, or use a hair tie to gather the fabric.
Will a cut t-shirt fray?
Knit jersey is commonly described as not fraying much, so a raw edge on a cotton tee usually holds. Woven shirts fray more and need a hem.
How short should a crop top be?
That is personal. Mark the length while wearing the shirt, then cut a little longer than the mark.
Do I need a sewing machine?
No. A raw-edge cut or fusible hem tape needs no sewing, and a hem can be stitched by hand.
Why does the cut edge of a cropped t-shirt curl up?
The cut edge of a cropped t-shirt curls because cotton jersey is a knit, and cut knit edges naturally roll toward one side. That is why the cut-and-stretch method exaggerates the curl on purpose for a soft, rolled finish. If you want a flat edge instead, fold and sew the hem with a zigzag or stretch stitch, or bond it with fusible hem tape, so the raw edge is enclosed and cannot roll.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.