If a leggings tag says “polyamide” and a swimsuit tag from another brand says “nylon,” you are looking at the same family of synthetic fibre under two names.
What is polyamide? In clothing, polyamide is the chemical family name for the fibre most Americans know as nylon. You will see “polyamide” on labels from Europe and Asia and “nylon” on many US labels, but both point to a long-chain synthetic polymer built from amide links. This guide explains where the two names come from, how the US Federal Trade Commission (FTC) defines the fibre, how polyamide fabric compares with polyester, and how to wash and thrift it. For the full history of the fibre itself, our hub guide What Is Nylon? The Synthetic Fiber Explained goes deeper.
Quick answer
Polyamide is the generic chemical name for nylon. The FTC defines nylon as a manufactured fibre made from “a long-chain synthetic polyamide,” and the FTC also accepts the generic fibre names in the international standard ISO 2076, which is why “polyamide” appears on many imported labels. In practice, polyamide vs nylon is a naming difference, not a different fabric.
Polyamide vs nylon: one fibre, two names
The FTC keeps the official list of generic fibre names that US textile labels must use, set out in 16 CFR 303.7. Its definition of nylon reads: “A manufactured fiber in which the fiber-forming substance is a long-chain synthetic polyamide in which less than 85 percent of the amide linkages are attached directly to two aromatic rings.”
Two things follow from that sentence. First, nylon is defined as a polyamide, so “polyamide” is the broader chemical family and “nylon” is the US label name for the textile fibre inside it. Second, the definition has a limit: polyamides where 85 percent or more of the amide links attach directly to two aromatic rings fall outside “nylon” under the FTC wording. For everyday clothing such as leggings, swimwear, hosiery and windbreakers, the fibre is the nylon kind.
The same FTC rule says it accepts both its own generic names and those in “International Organization for Standardization (ISO) 2076:2013(E).” We did not open the ISO standard itself, so we are relying on the FTC’s reference to it here. The practical upshot is simple: a label that says “polyamide” is using the international-style name for the fibre a US label would usually call nylon. The FTC handles other fibres the same way. Its labelling guidance notes that “elastane” is the ISO name for spandex and that either name may appear, and that “viscose” and “rayon” are interchangeable on labels.
So when a tag reads “80% polyamide, 20% elastane,” a US tag for a near-identical garment might read “80% nylon, 20% spandex.” Same fibres, different naming convention.
A short history of the fibre
According to Britannica, nylon was developed in the 1930s by a DuPont research team led by Wallace H. Carothers, and it was “the first synthetic polymer fibre to be produced commercially (in 1938).” The Science History Institute adds that Carothers switched his research from polyesters to polyamides in early 1934, and that he died in April 1937, before nylon went on sale.
The Science History Institute gives the launch dates: DuPont announced nylon on October 27, 1938. The first public sale of nylon stockings took place on October 24, 1939 in Wilmington, Delaware, where 4,000 pairs sold out in three hours. Sales across the country followed in May 1940. That stocking launch is why “nylons” still means hosiery to many people, even on garments labelled polyamide today.
The same Carothers lab also produced neoprene, a synthetic rubber covered in our guide What Is Neoprene? From Wetsuits to Fashion.
How polyamide fabric is made
The FTC calls nylon a “manufactured fiber,” meaning it does not grow on a plant or an animal. In general terms, the polymer is made in a chemical plant, melted or dissolved, and pushed out as continuous filaments. Those filaments can be used smooth and long for sheer hosiery and slick shell fabrics, or textured and cut into shorter lengths to feel softer. The fibre is then knitted or woven like any other yarn.
That flexibility explains why polyamide fabric shows up in such different places. Fine-gauge knits become tights and swimsuits. Tightly woven polyamide becomes jacket shells and backpacks. Very fine polyamide filaments are one of the common ingredients in microfibre, which you can read about in What Is Microfiber? Fine Synthetic Fibers in Clothing. Blended with elastane, polyamide makes the stretchy, smooth knit used in much activewear.
How polyamide feels and performs
Performance depends on the yarn, the knit or weave and the finish, so a cheap sheer pair of tights and a heavy hiking shell can behave very differently even though both say polyamide. The table below sums up the general trade-offs.
| Trait | What it means for you | Trade-off |
|---|---|---|
| Low moisture absorption | A P&G laundry scientist, quoted in Martha Stewart Living, says polyester and nylon are “less likely to shrink because they do not tend to absorb moisture.” Garments tend to dry quickly. | Fabrics that absorb little moisture are commonly said to feel clammy on skin in hot weather unless the knit is designed to move sweat. |
| Smooth filament yarns | Gives the sleek surface of swimwear, tights and shell jackets. | Smooth knits can show snags, and a pulled loop is hard to fix. |
| Heat sensitivity | A common care rule is that synthetics can be damaged by high heat. | Hot irons and hot dryers can glaze, melt or distort the fabric. |
| Blends well | Mixes with elastane for stretch and with wool or cotton in socks and knits. | Blends follow the care needs of the most delicate fibre on the label. |
| Synthetic fibre | Made from polymers rather than plants or animals. | Like other synthetics, it can shed microfibres in the wash (see below). |
Blending note: one low-to-medium authority source on wool felting says that blending wool with nylon or polyester reduces felting. That is one reason you will often see a small percentage of polyamide in wool socks and knitwear, but treat it as a general tendency rather than a guarantee.
Polyamide vs polyester
Polyamide vs polyester is the comparison most shoppers actually face, because the two fibres turn up in the same activewear, swimwear and outerwear aisles. They are different polymers. The FTC defines polyester as a synthetic polymer with at least 85 percent by weight of an ester of a substituted aromatic carboxylic acid, while nylon is defined by its amide links, as above. Neither is a better fibre across the board. Here is how they differ in the ways shoppers notice:
| Polyamide (nylon) | Polyester | |
|---|---|---|
| FTC definition | Long-chain synthetic polyamide | At least 85% ester of a substituted aromatic carboxylic acid |
| Shrinkage | Less likely to shrink, per the P&G scientist quoted above | Same: less likely to shrink, per the same source |
| Where it is common | Hosiery, swimwear, leggings, shells, bags | Permanent-press blends, fleece, linings, sportswear |
| Stains | Treat by the care label | Smithsonian MCI notes polyester tends to absorb oily stains |
| Heat | Low iron and dryer settings, as a common rule | Low iron and dryer settings, as a common rule |
Many garments use both. A swimsuit might be polyamide and elastane while its lining is polyester. Our guides What Is Polyester? Pros, Cons and How to Care for It and Cotton vs Polyester cover polyester in more detail, and What Is Spandex (Elastane, Lycra)? Stretch Fiber Explained explains the stretch fibre that so often comes along with polyamide.
How to wash polyamide
Start with the care label. Under the FTC Care Labeling Rule, a US label “must say whether the product should be washed by hand or machine, and give a water temperature setting if regular use of hot water will harm the product.” If the label disagrees with any general advice here, follow the label.
A common method for everyday polyamide clothing:
- Check the label for the wash method, temperature and any bleach instruction.
- Turn the garment inside out to protect the surface from snags.
- Close zips and hooks so they do not catch other items.
- Place delicate pieces such as tights in a mesh laundry bag.
- Wash on a cool or warm setting the label allows, with like colours.
- Skip the dryer or use the lowest heat setting.
- Hang or lay flat to dry, away from radiators and direct heat.
Bleach. FTC guidance explains that a label reading “Only non-chlorine bleach, when needed” means chlorine bleach is expected to harm the item, and “Do not bleach” means every bleach would. If your polyamide piece contains elastane, a Clorox expert says they don’t recommend bleaching spandex. Never mix bleach with ammonia, vinegar or other cleaners. If anyone swallows or breathes in a cleaning product, call Poison Control (1-800-222-1222 in the US).
Ironing. The FTC says that if a hot iron would harm a product and consumers might touch it up, the label should say “Do not iron.” On garments that can be ironed, the one-dot iron symbol (about 110 °C under the ISO/GINETEX system, according to summary sources) is the usual setting listed for synthetics. Use a press cloth and keep the iron moving.
Shrinking. For more on why synthetics shrink less than cotton, see Does Nylon Shrink? Heat and Care Explained. Less likely is not never, though, so heat is still the main risk.
Microfibre shedding. One peer-reviewed study in Scientific Reports (2019) measured 124 to 308 mg of microfibres per kilogram of washed synthetic fabric. A common way to cut down on wash friction is to wash full loads of similar fabrics on shorter, cooler cycles. Some people use a fibre-catching wash bag, which you can find with a Microfiber Filter Laundry Bag on Amazon search.
Where you will find polyamide fabric
- Leggings and activewear. Polyamide and elastane knits are common. Our Sustainable Activewear guide covers how to read activewear fibre claims. Shop a range with Polyamide Leggings Women on Amazon.
- Swimwear. Polyamide-elastane blends are a staple. Rinse after pool or sea water and dry in the shade as a common habit.
- Hosiery. The original nylon product, still often labelled nylon in the US and polyamide elsewhere.
- Outerwear shells. Woven polyamide is common on windbreakers and rain shells; see Types of Jackets for styles. A Nylon Windbreaker Jacket on Amazon search shows the range.
- Socks and knits. Small percentages added to wool or cotton.
Top-selling match on Amazon
- 【Waterproof & Breathable】Rain jacket for men is made of high density soft shell fabric, high…
- 【Ultralight & Back Packable Pocket】This waterproof rain jacket is ultra-light, weighs 0.4lb…
Thrift note: what to check on a polyamide label
Secondhand polyamide can be a good find, because the fibre itself is less likely to shrink. Check these points on the rack:
- Fibre names. Polyamide and nylon point to the same fibre family under the FTC’s naming rules. Elastane and spandex are likewise the same fibre.
- Stretch recovery. Pull a section of the waistband or leg gently. If it stays baggy, the elastane has likely lost its recovery, often from heat or chlorine.
- Snags and runs. Look along seams and the seat area in good light.
- Shine or glazing. A shiny patch on a matte fabric can be a sign of a too-hot iron.
- Coating. On shells, check the inside for a peeling or sticky coating, which usually cannot be restored.
- Care label. If it is missing, treat the piece as delicate: cool wash, no bleach, no dryer.
Before wearing a thrifted piece, wash it by the label. Our Types of Fabric guide is a handy reference for other fibres you may find blended in.
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
FAQ
Is polyamide the same as nylon?
For clothing, yes. The FTC defines nylon as a fibre made from “a long-chain synthetic polyamide,” and it accepts ISO 2076 generic names, which is why many imported labels say polyamide. It is a difference in naming convention.
Is polyamide fabric stretchy?
The strong stretch in leggings and swimsuits usually comes from elastane (spandex) blended in, as a common rule. Check the label for both fibres.
Does polyamide shrink?
A P&G laundry scientist says nylon is “less likely to shrink” because it does not tend to absorb moisture. High heat can still damage it, so a cool wash and low or no dryer heat is the common advice.
Polyamide vs polyester: which is better?
Neither wins outright. They are different polymers with overlapping uses. Look at the knit, the weight and the care label rather than the fibre name alone, and choose the piece that suits the activity.
Can you iron polyamide?
Only if the label allows it. Use the lowest setting, a press cloth and constant movement. If the label says “Do not iron,” a cool steamer held at a distance or hanging in a steamy bathroom are common alternatives.
Is polyamide breathable?
That depends more on the knit or weave than the fibre. A fine open knit feels very different from a tightly woven shell. Since polyamide absorbs little moisture, look for garments designed for the activity if sweat is a concern.