Shoulder width decides how a shirt or jacket sits more than almost any other number, and it is one of the hardest things to change with alterations.
Knowing how to measure shoulder width is most useful for shirts, blazers and coats, where the shoulder seam needs to land in roughly the right place for the rest of the garment to hang well. Unlike the chest or waist, shoulder width is usually measured straight across rather than around the body, and the easiest way to take it is from a garment that already fits you. This guide covers the garment method, a body method with a helper, and how to use the number when shopping. It pairs naturally with our guide to How to Measure Your Chest for Shirts and Jackets, since chest and shoulders together set the size of most tops and jackets.
What you need
- A soft tape measure, or a rigid ruler for flat garment measuring. A Soft Tailor Tape Measure on Amazon works for both body and garment measurements.
- A shirt or jacket that fits you well through the shoulders.
- A flat surface such as a table or a bed.
- A helper, if you want to measure on the body.
Top-selling match on Amazon
- Measuring Range: 0 to 60 inches and 0 to 150 centimeters. There is a centimeter scale on the back…
Method 1: measure a shirt laid flat (Charles Tyrwhitt)
Charles Tyrwhitt’s guide to measuring for a shirt describes shoulder width as a flat, seam-to-seam measurement. It notes that shoulder width is measured flat and is not a circumference measurement. Per Charles Tyrwhitt:
- Button the shirt fully.
- Lay it face down on a flat surface, so the back of the shirt faces up.
- Smooth the back and shoulders flat without stretching the fabric.
- Find the top of the two shoulder seams, where each sleeve joins the body.
- Measure straight across from the top of one shoulder seam to the top of the other, end to end.
- Write the number down.
The same approach works for most jackets and knitwear, with one adjustment: structured jackets have shoulder pads and a curved shoulder line, so lay the jacket as flat as you can and measure from seam point to seam point across the back, below the collar.
Method 2: measure on the body (a common method)
Measuring the body directly is a common approach, but it is harder to do alone and slightly less precise than measuring a garment, because the shoulder point can be tricky to find. If you want to try it:
- Stand straight and relaxed, with your arms at your sides.
- Ask a helper to find the bony point at the outer edge of each shoulder, where a shirt’s shoulder seam would sit.
- Have them place the end of the tape on one shoulder point.
- Run the tape across the upper back, following its natural curve, to the other shoulder point.
- Read and write down the number.
Because this follows the curve of the back, it may come out slightly larger than a flat garment measurement. Note which method you used next to the number so you compare like with like.
Using your shoulder measurement when shopping
- Look for garment measurements. Many brands list shoulder width under “garment measurements” or “product measurements” rather than in the main body chart. Compare your favourite shirt’s flat number with these.
- Check the shoulder seam position. As a common guide, the shoulder seam on a fitted shirt or tailored jacket sits near the edge of the shoulder. Relaxed and oversized styles deliberately drop the seam lower down the arm, so the listed shoulder width will be larger by design. Our guide to Drop Shoulder Denim Jacket styles covers that look.
- Think about layering. A coat worn over a jumper needs a little more room across the shoulders than a shirt.
- Remember the sleeve link. Where the shoulder seam sits changes how long a sleeve looks. See How to Measure Sleeve Length (Shirts, Jackets and Suits) for the two sleeve conventions.
Shoulders are widely considered one of the harder areas to alter on a tailored jacket, so many people treat shoulder fit as the first thing to get right and leave sleeve length and waist shaping to a tailor. A tailor can tell you what is possible on a specific piece. For shirt sizes generally, see our Men’s Shirt Size Chart.
Common mistakes
- Measuring across the front. The front of a shirt has the placket and buttons, which can bunch. Measure across the back.
- Stretching knitwear. Sweaters and T-shirts stretch easily. Smooth them, do not pull them.
- Measuring the collar instead of the seams. The tape runs below the collar, from seam to seam.
- Mixing flat and curved numbers. A body measurement over the curve of the back is not the same as a flat garment number.
- Treating it as a circumference. As Charles Tyrwhitt notes, shoulder width is a straight-across measurement, not a loop around the body.
Thrift and vintage note
Shoulder width is one of the most useful numbers to carry when thrifting, because labels on older jackets and shirts often do not match current sizing, and shoulder styles have changed a lot over the decades, from padded and wide to soft and narrow. Measure a shirt and a jacket you already like before you go, save the numbers, and take a small tape such as a Retractable Tape Measure on Amazon with you. Lay the thrifted piece flat on a counter, measure seam to seam across the back and compare. For more on thrifting older pieces, see How to Find Vintage Clothing, and for the full set of body measurements, How to Measure Your Waist for Clothing Sizes and How to Measure Your Hips for Clothing Sizes.
Top-selling match on Amazon
- 16-foot retractable measuring tape for personal or professional use
- Provides both SAE and metric measurements
Shop the look on Amazon
Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.
FAQ
Is shoulder width measured across the front or the back?
For garments, across the back is common, because it lies more evenly. Charles Tyrwhitt’s method lays the shirt face down and measures between the tops of the two shoulder seams.
Is shoulder width a circumference?
No. Charles Tyrwhitt describes it as measured flat and not a circumference measurement.
Can I measure my own shoulder width without help?
It is difficult on the body. Measuring a well-fitting shirt laid flat is the easier option and gives a number you can compare with garment charts.
How should shoulder width fit on a jacket?
A common guide for tailored jackets is that the shoulder seam sits near the edge of your shoulder. Relaxed and oversized cuts are designed to sit lower, so check the style description.
Does shoulder width matter for women’s tops?
Yes, especially for blazers, shirts and coats. Petite ranges may also adjust shoulder width; see What Is Petite Size? Petite vs Regular Explained.
What size should you buy if your shoulders are broader than your chest size?
Buy the size that fits your shoulders, then have the rest adjusted. Shoulders are widely considered one of the hardest areas to alter on a tailored jacket, while sleeve length and waist shaping are easier for a tailor to change. Check that the shoulder seam sits near the edge of your shoulder, compare the brand’s garment shoulder measurement with a shirt that fits you, and ask a tailor what is possible on that piece.