Guides

Diamond Clarity Chart: The GIA Scale Explained

Diamond Clarity Chart: The GIA Scale Explained

Clarity is the grade that tells you how many tiny internal and surface features a diamond has, and how easy they are to see. Here is the full GIA scale, grade by grade, in plain language.

A diamond clarity chart lays out the grades a lab gives a diamond based on its inclusions and blemishes. The best-known version is the one used by the Gemological Institute of America (GIA), which grades clarity on 11 steps judged under 10x magnification. This guide explains each of those GIA clarity grades in the order they appear, clears up the difference between VS1 and VS2, explains where the retail term “eye-clean” fits, and shows how clarity works alongside color. It does not cover prices, which change with the market and with every other quality factor. If you are browsing pieces rather than learning the scale, our Amazon Jewelry guide covers affordable jewellery, and our Diamond Color Chart is the companion to this page.

The GIA diamond clarity scale at a glance

GIA uses 11 clarity grades, and each one is judged by a trained grader looking at the diamond under 10x magnification. The table below lists them from highest to lowest, with GIA’s definition for each group.

Grade Full name What GIA says is visible at 10x
FL Flawless No inclusions and no blemishes visible
IF Internally Flawless No inclusions visible; may have blemishes
VVS1 Very, Very Slightly Included 1 Inclusions so slight a skilled grader has trouble seeing them
VVS2 Very, Very Slightly Included 2 Inclusions so slight a skilled grader has trouble seeing them
VS1 Very Slightly Included 1 Inclusions can be seen with effort and count as minor
VS2 Very Slightly Included 2 Inclusions can be seen with effort and count as minor
SI1 Slightly Included 1 Inclusions are noticeable
SI2 Slightly Included 2 Inclusions are noticeable
I1 Included 1 Inclusions are obvious and may affect transparency, brilliance and durability
I2 Included 2 Inclusions are obvious and may affect transparency, brilliance and durability
I3 Included 3 Inclusions are obvious and may affect transparency, brilliance and durability

Read the scale as six groups: Flawless, Internally Flawless, VVS, VS, SI and Included (I1–I3). Within each paired or triple group, the number tells you where the stone sits inside the group: a 1 ranks above a 2, and in the Included group I2 ranks above I3. GIA’s group definitions are shared across the numbers, so the difference between, say, SI1 and SI2 is a matter of degree within the same description.

Notice the phrase that runs through every row: “at 10x.” Clarity grades describe what a skilled grader sees under magnification, not necessarily what you see when you look at a ring across a table. That distinction matters a lot when you are deciding how much clarity you actually need, which we come back to below.

Inclusions and blemishes: what clarity is measuring

GIA separates the features it grades into two kinds:

  • Inclusions are internal characteristics, or characteristics that reach the surface from inside the stone.
  • Blemishes are external features on the surface of the diamond.

This split explains the difference between the top two grades. A Flawless diamond shows neither inclusions nor blemishes at 10x. An Internally Flawless diamond shows no inclusions at 10x but can have blemishes. Every grade below IF is named for its inclusions: very, very slightly included, very slightly included, slightly included and included.

A helpful way to picture it: clarity is about how much of a diamond’s inner and outer surface is interrupted, and how easy those interruptions are to spot. A stone further down the scale is not “broken”; its features are simply more visible to a trained eye under magnification. Only in the Included (I1–I3) grades does GIA say inclusions may affect transparency, brilliance and durability.

Each clarity grade explained

Here is what each group means in practice, using GIA’s definitions as the anchor and adding common buying context. Anything beyond GIA’s wording is general guidance rather than a lab rule.

Flawless (FL)

Per GIA, a Flawless diamond has no inclusions and no blemishes visible at 10x. It sits at the very top of the scale. For most jewellery shoppers, FL is more of a reference point than a target: it describes a stone with nothing for a skilled grader to note under standard magnification.

Internally Flawless (IF)

GIA defines IF as no inclusions visible at 10x, though the stone may have blemishes. Because blemishes are surface features, they are the part of a diamond most affected by wear and polishing over time. Since GIA’s definitions describe what is visible at 10x, the line between FL and IF is drawn under magnification, not at arm’s length.

VVS1 and VVS2 (Very, Very Slightly Included)

GIA says inclusions in the VVS grades are so slight that a skilled grader has trouble seeing them at 10x. That is a demanding standard: the person looking is trained, has proper magnification, and still struggles. VVS1 ranks above VVS2. For everyday wear, the VVS range is usually discussed as a choice for buyers who want a very high clarity grade on paper.

VS1 and VS2 (Very Slightly Included)

In the VS grades, GIA says inclusions can be seen with effort at 10x and are considered minor. This is the range many shoppers end up considering, because the inclusions are classed as minor and need effort to find even under magnification. The next section compares VS1 and VS2 in more detail.

SI1 and SI2 (Slightly Included)

GIA defines the SI grades as having inclusions that are noticeable at 10x. “Noticeable at 10x” still refers to magnification. Whether a given SI stone looks clean to the naked eye depends on the size, position and color of its inclusions, the stone’s shape and the setting, which is why retailers often encourage buyers to look at an SI stone in person or in detailed photos before deciding.

I1, I2 and I3 (Included)

In the Included grades, GIA says inclusions are obvious at 10x and may affect transparency, brilliance and durability. This is the only group where GIA’s wording goes beyond visibility to mention how the stone performs. For a ring worn every day, the durability note is worth taking seriously: ask the jeweller where the inclusions sit and whether they affect how the stone should be set, worn or cleaned.

VS1 vs VS2: what is the difference?

VS1 vs VS2 is one of the most searched comparisons on the clarity scale, and the honest answer is that they share a single GIA definition: inclusions can be seen with effort at 10x and are considered minor. VS1 sits one step higher than VS2 on the scale, which means a grader judged the VS1 stone’s inclusions to be slightly less noticeable than those of a VS2 stone.

What that means for a buyer is mostly a trade-off:

  • On paper, VS1 is the higher grade.
  • In person, both grades describe inclusions that need effort to find under magnification, so the difference is usually framed by jewellers as subtle.
  • In practice, the position and type of the inclusion in the specific stone can matter more to how it looks than the one-step difference in grade. A VS2 with an inclusion near the edge, where a prong may cover it, can look different from a VS2 with one in the centre of the table.

The same reasoning applies to VVS1 vs VVS2 and SI1 vs SI2. The number tells you the grader’s call within a group. The stone itself, and how it is cut and set, decides what you see.

What does “eye-clean” mean?

You will see “eye-clean” all over diamond listings. It is a retail and trade term, not a GIA grade, and it does not appear anywhere on the GIA clarity scale. Jewellers and retailers generally use it to describe a diamond whose inclusions are not visible to the naked eye at a normal viewing distance.

Because it is not a lab grade, “eye-clean” has no fixed standard. One seller’s eye-clean stone may not meet another’s idea of it, and viewing distance, lighting and eyesight all play a part. Treat the phrase as a description to check, not a guarantee. Ask which clarity grade the stone received on its report, and look at it yourself in good light, or request clear magnified photos when buying online.

Diamond color and clarity chart: how the two work together

Clarity is only one quality factor. Color is the other one people most often compare side by side. GIA’s normal color range runs from D, which is colorless, to Z, which shows light yellow, light brown or light grey. The table below sets the two scales next to each other so you can see the full grading vocabulary in one place.

Factor Scale (GIA) How it is judged Highest grade
Clarity 11 grades: FL, IF, VVS1, VVS2, VS1, VS2, SI1, SI2, I1, I2, I3 By a skilled grader under 10x magnification FL (Flawless)
Color D to Z (colorless to light yellow, brown or grey) Under controlled lighting, compared with masterstones of known grade D (colorless)

A few points about how they interact:

  • They are graded separately. A stone can be high in one and lower in the other. A D-color stone can be SI, and a VS stone can be K color.
  • Both are judged under controlled conditions. Clarity under 10x magnification, color under controlled lighting against masterstones, per GIA. What you see at home or in a shop will not always match those conditions.
  • Fluorescence is a separate characteristic. GIA describes fluorescence as a visible glow under UV light, and says blue fluorescence can make lower color grades (roughly “I” to “M”) look more colorless. GIA also says fluorescence does not cause haziness except in extremely rare stones. The Diamond Color Chart covers this in depth.

Fancy-color diamonds, such as pink or blue stones, fall outside GIA’s D-to-Z range entirely, so the usual color-and-clarity pairing works differently for them.

Buying notes: choosing a clarity grade

There is no single correct clarity grade. The right choice depends on how the piece will be worn, how closely you will look at it, and what matters most to you among the quality factors. These are common considerations, framed as trade-offs rather than rules.

Grade on paper vs what you see

Every GIA definition refers to what is visible at 10x. In everyday life, most people see a diamond with the naked eye, often at arm’s length. If you care most about how the stone looks when worn, it can make sense to focus on whether you can see inclusions without magnification rather than on the highest possible grade. If you care about the grade itself, for sentimental reasons or because you want a specific certificate, a higher grade answers that.

Ask for the grading report

A clarity grade only means something if you know who assigned it. Ask the seller which lab graded the stone and request the report. Grading standards can differ between labs and between in-house store grading and independent labs, so comparing two stones is easiest when both were graded the same way.

Look at the actual stone

Two diamonds with the same clarity grade can look different, because the grade summarises inclusions rather than mapping exactly where they are. When possible, view the stone in person under good light, or ask for magnified photos and video. A simple jeweller’s loupe, such as a 10X Jewelers Loupe on Amazon, gives you the same magnification the GIA scale is based on, although a trained grader’s eye is another matter.

Top-selling match on Amazon

GAIN EXPRESS Jewelers Loupe Magnifier 10X Triplet Loupe | Jewelry Magnifying Glass with UV/LED Light, Foldable

GAIN EXPRESS Jewelers Loupe Magnifier 10X Triplet Loupe | Jewelry Magnifying Glass with UV/LED Light, Foldable Jewelers…

  • Gemstone Inspection: Gemologists and jewelers often use loupes to inspect gemstones for clarity, color…
  • Strong And Durable: This triplet loupe made of full metal body, UV light (long wave), Its triplet lens…
  • Portable And Convenient: Jewelry loupes are often compact and portable, making them easy to carry around for…
$20.90(as of November 2026)Check price on Amazon

Consider the setting and shape

Prongs, bezels and halo settings can cover parts of a stone’s edge, so an inclusion near the girdle may be less visible once set. Shape matters too: many jewellers say some cuts show inclusions more readily than others. These factors are about how the finished piece looks, which is why a grade alone does not tell the whole story.

Think about durability for daily wear

GIA notes that in the I1–I3 grades, inclusions may affect durability. For an engagement ring or a band worn every day, that is worth weighing. Ask the jeweller whether any inclusion is in a position that could matter for setting or impact, and how they recommend caring for the stone.

Avoid “best grade” thinking

You will see advice online naming one clarity grade as the smart buy. Treat that as opinion. Clarity, color, cut and size all trade off against each other, and different buyers weigh them differently. One person may prefer a larger stone with a lower clarity grade; another may prefer a smaller, higher-clarity stone. Both are reasonable.

Sizing and fit first

For rings, get the size right before anything else. Resizing can be possible but adds cost and time, and some settings are harder to resize than others. Our Ring Size Chart explains how to measure.

Clarity and secondhand diamond jewellery

Thrift stores, estate sales and resale sites can turn up older diamond jewellery. A few common checks help when buying secondhand:

  1. Ask whether the piece comes with a grading report. Many older pieces do not.
  2. If there is a report, check that its details match the stone, for example by comparing measurements with a jeweller.
  3. Without a report, consider an independent appraisal before paying a significant amount.
  4. Look at the setting. Worn prongs can let a stone loosen, and a jeweller can check and repair them.
  5. Remember that surface blemishes can build up over years of wear, which affects clarity at the top of the scale where blemishes count.

Our guides to Thrift Store Jewelry Finds and a real Jewelry Box Thrift Store Haul cover what else turns up secondhand and how to judge it.

Caring for diamond jewellery

Clarity is set when the stone is graded, but a dirty diamond can look duller and less clear than it is. Oils from skin, lotion and soap residue build up on and behind the stone. A common, gentle home routine:

  1. Check the maker’s or jeweller’s care instructions, especially if the piece includes other stones.
  2. Soak the piece briefly in warm water with a few drops of mild dish soap.
  3. Brush gently around the stone and under the setting with a soft toothbrush.
  4. Rinse in clean warm water, with the sink plugged.
  5. Dry with a soft, lint-free cloth.

If the stone is graded I1–I3, or has visible inclusions that reach the surface, ask a jeweller before using an ultrasonic or steam cleaner. If the piece combines diamonds with softer or treated stones, such as emerald, opal or pearl, GIA advises keeping those stones out of ultrasonic and steam cleaners, so clean to suit the most delicate stone. GIA also suggests storing softer stones like opal and garnet apart from harder gems such as diamond to prevent scratches.

For a full routine by metal and stone, see our How to Clean Jewelry at Home (by Metal and Stone) guide. A Jewelry Cleaning Kit Soft Brush on Amazon keeps the basics together.

Diamond clarity chart FAQ

How many clarity grades does GIA use?

Eleven: FL, IF, VVS1, VVS2, VS1, VS2, SI1, SI2, I1, I2 and I3, all judged under 10x magnification.

What is the highest diamond clarity grade?

Flawless (FL), which GIA defines as no inclusions and no blemishes visible at 10x. Internally Flawless (IF) is next: no inclusions visible at 10x, though it may have blemishes.

Is VS1 or VS2 better?

VS1 ranks one step higher than VS2 on GIA’s scale. Both share GIA’s definition: inclusions can be seen with effort at 10x and are considered minor. In a finished piece, the location of the inclusions and the setting can matter as much as the grade.

Is eye-clean a GIA grade?

No. “Eye-clean” is a term used by jewellers and retailers. It is not part of the GIA clarity scale and has no fixed standard, so check the actual grade and look at the stone.

What is the difference between an inclusion and a blemish?

Per GIA, inclusions are internal characteristics, or ones that reach the surface. Blemishes are external features on the surface.

Do I-grade diamonds look bad?

Not necessarily, but GIA says inclusions in the I1–I3 grades are obvious at 10x and may affect transparency, brilliance and durability. Look at the specific stone and ask the jeweller how its inclusions affect wear.

Is clarity more important than color?

Neither factor is more important in general. They are graded separately, and buyers weigh them differently. See the Diamond Color Chart for how color grading works.

Does diamond clarity affect how much a diamond sparkles?

Clarity has little effect on sparkle in most grades, because GIA only says inclusions may affect brilliance in the Included grades, I1 to I3. From Flawless down through the SI grades, GIA’s definitions describe how visible inclusions are at 10x, not how the stone performs. Sparkle comes mainly from how well a diamond is cut, which controls how light returns to the eye, so a well-cut stone in a middle clarity grade can look livelier than a poorly cut stone graded higher.

Shop the look on Amazon

Everything you need to build a secondhand-style wardrobe, delivered. We may earn a commission on purchases.

Browse picks on Amazon →